Probes and Electrodes
Hach Company Sension+ 5056 laboratory ORP electrode for general applications
Sension+ 5056 is a combination platinum ORP electrode with a glass body and non-refillable gel-electrolyte reference. The 5056 has a fixed 1 meter cable and BNC connector dedicated for use with Hach Sension+ Laboratory pH (mV) meters. The 5056 has a ceramic junction is ideal for oxidation-reduction potential (ORP) measurements in general aqueous applications.
Cole-Parmer Insertion/Submersion pH Probe; DJ/CPVC/100Ohm RTD; Tinned/BNC
In-line or submersible electrodes with probe guard operate from 23 to 176°>F (-5 to 80°>C) and have a PVC housing with a 3/4'' NPT(M) fitting on both ends. Epoxy body withstands pressures to 100 psi. Measure pH from 0 to 14. All electrodes measure 6-3/4''L x 1'' OD, with a 1-3/4'' insertion depth.
World Precision Instrument Potassium Electrode Tips, Replacement
Replacement tips
Set of 3 potassium replacement tips for ion selective electrodes. Change the tip on your holder in less than a minute. Can be stored 3-4 months under refrigeration.
Research Products International Corp Replacement pH Electrode for Checker 1 pH Tester
The spare pH electrode for the Checker pH meter. Replacing the pH electrode is both quick and easy. Simply unscrew the old probe to be replaced and screw on the new one.
Cole-Parmer PH ELECTRODE FLAT PT100 CPVC
Replace or upgrade electrodes, probes, cells, and parts for Cole-Parmer meters. Many of these items are compatible with other brands of meter. Please contact an application specialist for assistance.
HORIBA INSTRUMENTS INCORPORATED 9625-10D PLAS FREE PH ELECTROD
NC2105334 9625-10D PLAS FREE PH ELECTROD
ALPHA MEASUREMENT SOLUTIONS LLC SILVER/SULF DBL JUNC ELECTRODE
NC2137762 SILVER/SULF DBL JUNC ELECTRODE
Chemglass Life Sciences 12mm Shaft Diameter, 125mm Usable Shaft Length, 25mm Minimum Immersion Length, Glass Shaft Material, Plug In Type G Electrode Head, 0 to 100°C Temperature Range
Metrohm pH electrodes designed to be used with Chemglass reactors and data loggers. All electrodes are supplied with integrated PT 1000 sensor for temperature correction and have a BNC connector. 12mm Shaft Diameter, 125mm Usable Shaft Length, 25mm Minimum Immersion Length, Glass Shaft Material, Plug In Type G Electrode Head, 0 to 100¿C Temperature Range.Electrode is designed to fit into a CG-1872-B baffle using the CG-1872-A-10 adapter.
Cole-Parmer Oakton Ion Selective Electrode (ISE), Single-Junction, Epoxy; Ammonium
A wide variety of ion selective electrodes are availabe to suit a wide array of applications. Select from four electrode types: membrane, solid-state, gas sensing, and glass bulb; typical response time is 20 to 30 seconds. Epoxy-body ISEs are either single- or double-junction, and the glass-body type is double junction.
Cole-Parmer Tuff-Tip pH Electrode; 100 Ohm PT RTD (Tinned Ends), BNC, 3/4"
Don't worry about bulb breakage, the unique Tuff-Tip design helps protect bulbs. Choose chemical-resistant Ryton PPS standard electrode or with graphite tip. Eliminate electrical noise with graphite-tipped models. Ideal for viscous or severe applications, these electrodes reduce contamination and clogging with uniform pore size.
Cole-Parmer Tuff-Tip pH Electrode 100 Ohm PT RTD(Mini Audio Plug), BNC, 3/4"
Don't worry about bulb breakage, the unique Tuff-Tip design helps protect bulbs. Choose chemical-resistant Ryton PPS standard electrode or with graphite tip. Eliminate electrical noise with graphite-tipped models. Ideal for viscous or severe applications, these electrodes reduce contamination and clogging with uniform pore size.
Research Products International Corp Replacement Platinized Titanium Electrode for Genie Blotter
Replacement Platinized Titanium Electrode for use with Genie Blotter
Hach Company Radiometer Analytical PHC2085-8 Combination Red-Rod pH Electrode with Temperature Sensor (epoxy body, BNC+cinch)
The Radiometer PHC2085-8 Combination pH Electrode has a robust epoxy body, Red-Rod reference system, refillable electrolyte (sat. KCl), integrated temperature sensor, and porous pin junction for general purpose applications. The PHC2085-8 has BNC + cinch (RCA) connectors. Please reference the PHC2085-6 (article no. E16M345) for a version of this probe compatible with Hach Sension+ laboratory pH meters.
![eMolecules 123318-82-1 | Clofarabine | Ambeed | MFCD00871077 | 303.680 | C10H11ClFN5O3 | 97.000 | Nc1nc(Cl)nc2n(cnc12)[C@@H]1O[C@H](CO)[C@@H](O)[C@@H]1F | 1mg | 761012491](https://assets.fishersci.com/TFS-Assets/CCG/product-images/502424606.PNG-250.jpg)
eMolecules 123318-82-1 | Clofarabine | Ambeed | MFCD00871077 | 303.680 | C10H11ClFN5O3 | 97.000 | Nc1nc(Cl)nc2n(cnc12)[C@@H]1O[C@H](CO)[C@@H](O)[C@@H]1F | 1mg | 761012491
Clofarabine | Ambeed | 123318-82-1 | MFCD00871077 | 303.680 | C10H11ClFN5O3 | 97.000 | Nc1nc(Cl)nc2n(cnc12)[C@@H]1O[C@H](CO)[C@@H](O)[C@@H]1F | 1mg | 761012491